Corn yield & water use characteristics are affected by tillage.

Download Article:

Published November 3, 2009 | By admin


New Report: F. Lamm & R. Aiken show promising results for Strip-Till & No-Till


This study was completed by Freddie Lamm and Rob Aiken at the NW Kansas Experiment Station-Colby, KS.Corn was grown on a deep, well drained silt loam soil (Aridic Argiustolls) at Colby, Kansas, from 2004 to 2007 using three plant densities (66,300, 74,500, or 82,300 plants /ha) under conventional, strip, or no tillage systems for irrigation capacities that were limited to 1 inch (25 mm) every 4, 6, or 8 days. Corn yield increased approximately 10% from the minimum to maximum irrigation capacity in these four years of varying precipitation and crop evapotranspiration. Although strip tillage and no tillage had numerically greater grain yields than conventional tillage in all four years [approx. 8.1% and 6.4%, respectively, for the four-year average], strip tillage was significantly greater in only two years and no tillage in only one year. Seasonal water use of the crop tended to be greater for the strip tillage and no tillage treatments as compared to conventional tillage and was significantly greater for strip tillage in two years and for no tillage in one year. The small increases in total seasonal water use (<10 mm) for strip tillage and no tillage correspond with greater grain yields for these tillage systems. Water productivity (grain yield/crop water use) also tended to be numerically greater (three of four years) for the strip tillage and no tillage treatments as compared to conventional tillage because of increased yields for the reduced tillage schemes. Increasing plant density from 66, 300 to 82,300 plants/ha generally increased grain yield and water productivity (four-year average of approximately 6% for each factor). Results suggest that strip tillage obtains the residue benefits of no tillage in reducing evaporation losses without the yield penalty that sometimes occurs with large amounts of residue. Both strip tillage and no tillage should be considered as improved alternatives to conventional tillage, particularly when irrigation capacity is limited.


Journal article written in the American Society of Agricultural Engineers Journal Vol 52, 2009




Share on facebook
Share on twitter
Share on linkedin

More Jobs

WordPress Appliance - Powered by TurnKey Linux